We present a transformable catheter head structure for endoscopic catheter allowing the simultaneous use of a camera module and a large tool channel introduced through a small incision. At the site of interest, the head with a camera can be expanded from the initial straight configuration, which opens a window for advancing a tool that is located behind the camera. Two different designs were proposed and prototyped. One option has flexure joints directly fabricated at the distal end of a polymer catheter by laser micro-machining, while another design employs a hinged metal head assembled at the tip of the same type of catheter. The kinematic behavior of each head was evaluated during the head-up and tip steering motions, and compared with each other to draw a selection guideline between them. Experimental results prove the feasibility of the proposed head structure for smarter endoscopic catheters.
Paper
Full text
Design and Fabrication of Transformable Head Structures for Endoscopic Catheters*
Semantic Scholar · Engineering · 2019
Abstract
We present a transformable catheter head structure for endoscopic catheter allowing the simultaneous use of a camera module and a large tool channel introduced through a small incision. At the site of interest, the head with a camera can be expanded from the initial straight configuration, which opens a window for advancing a tool that is located behind the camera. Two different designs were proposed and prototyped. One option has flexure joints directly fabricated at the distal end of a polymer catheter by laser micro-machining, while another design employs a hinged metal head assembled at the tip of the same type of catheter. The kinematic behavior of each head was evaluated during the head-up and tip steering motions, and compared with each other to draw a selection guideline between them. Experimental results prove the feasibility of the proposed head structure for smarter endoscopic catheters.